Cleaning And Maintenance Of Mountaineering Shoes

< p > mountaineering < a target= "_blank" href= "//www.sjfzxm.com/" > shoes < /a > is specially designed for mountain climbing and travel shoes, which is very suitable for outdoor sports.

Water repellency is the primary function of modern mountaineering shoes. The waterproof and breathable properties of mountaineering shoes are unmatched by ordinary sports shoes.

< /p >

< p > < strong > 1 storage: < /strong > < /p >

< p > strong > /strong > each time after wearing, take out the insole, relax the shoelace and let the shoes dry naturally.

If your shoes are wet, fill your shoes with newspapers or shoe pads (don't forget to change the wet newspaper now and then).

At the same time, avoid leaving shoes in a high temperature environment (including vehicles).

Do not store dry shoes in damp space (< a target= "_blank" href= "//www.sjfzxm.com/" > Leather > /a > natural products, easily mouldy).

< /p >

< p > < strong > 2. cleaning: < /strong > < /p >

< p > strong > /strong > dirt particles enter the leather fibers, causing the fibers to wear and break.

< /p >

< p > A) for dirty GORE-TEX shoes, first use a brush to clean the water. For non leather shoes (such as Nissan), just sponge them in warm water.

If it is oil dirt or very dirty strong pollution, it is better to use leather cleaner and nylon brush to clean the surface. As for the lining of shoes, wipe it with wet cloth, because the salt coming from sweat will quickly enter the pores of leather through the lining, and destroy the leather tissue to dry and crack.

< /p >

< p > b) clean up the GORE-TEX shoes of frosted skin. When the shoes are dry, remove the floating soil and use the water spray agent to process them.

Do not use shoes wax or shoe polish, they will weaken the air permeability of shoes.

< /p >

< p > C) clean Non Leather GORE-TEX shoes - cold water cleaning, natural drying.

After drying, it is treated with water spray.

Do not use shoes wax or shoe polish, they will weaken the air permeability of shoes.

< /p >

< p > < strong > 3. drying: < /strong > < /p >

< p > A) all shoes must be dried at room temperature.

Because leather is easy to burn, deformed, bent, dry and burst, do not expose your shoes near the heat source or in the sun.

< /p >

< p > b) thick mud to dry and clean up the wind.

Do not use fire to dry climbing boots, excessive heat, leather will dry, wrinkle, and the performance of adhesive will be destroyed, will melt the boot.

< /p >

< p > C) do not dry with a stove or blower. If you use a stove or dryer to dry, it will not only seriously deform, cause cracking or glue opening, but also seriously affect the service life.

< /p >

< p > < strong > 4. maintenance: < /strong > < /p >

< p > well maintained mountaineering boots can be used for several years. Regular use of shoe care products, maintenance of leather and restoration of surface water resistance.

If GORE-TEX shoes are not maintained and water treated, the waterproof and breathability of the GORE-TEX film will not be damaged, but it will affect the permeability, durability and comfort of the whole pair of shoes.

The water repellent recommended by GORE can be used.

< /p >

< p > A, you can use cortex protection wax spray or GORE-TEX special wax spray to evenly spray 2-3 times on the mountaineering shoes, which is conducive to prolonging the service life.

< /p >

< p > b) water treatment: treated with non water repellent after non leather shoes.

The water will be penetrated from the seam line. The waterproofing agent can improve the waterproof degree of the upper and the sutures. The newly purchased mountaineering boots must be repeatedly coated with water repellent for a period of time. Meanwhile, the boots should be kept dry and clean, and the waterproofing agents must be applied to sutures and pinholes. One to two days before the start of the activity, the waterproof agent should be applied to the upper surface so that the leather can be absorbed completely.

Nylon cloth mountaineering boots, because porous is not easy to waterproof, can use silica gel derivative (silicon-based) spray, regardless of any boots must keep dry state.

< /p >

< p > C) wipe the oil on the tongue of the shoe to prevent the leather from making noise, and rub the oil on the metal parts to prevent them from oxidizing and rusting.

< /p >

< p > < strong > 5. replace sole: < /strong > /p >

< p > the wear rate of the boot is faster than that of the upper. Generally, the high price < a href= "//www.sjfzxm.com/news/index_x.asp" > the mountaineering boots < /a > can replace the boot sole, and the updated boots will be tighter because the vamp has changed the original size.

< /p >